Evaporator Master Beinuo Machinery
waste water treatment falling film industrial evaporator price/Industrial Waste Water Evaporation Multiple Effect Forced Circulation Evaporator
waste water treatment falling film industrial evaporator price/Industrial Waste Water Evaporation Multiple Effect Forced Circulation Evaporator
- Main Applications:： Suitable for evaporation concentration is lower than the saturation density of salt material, and heat sensitive, viscosity, foaming, concentration is low, liquidity good sauce class material. Especi
- Features:： low temperature continuous has high heat transfer efficiency, shorter time for heating the material, etc main features.
- 产品参数
- Main Applications:： Suitable for evaporation concentration is lower than the saturation density of salt material, and heat sensitive, viscosity, foaming, concentration is low, liquidity good sauce class material. Especi
- Features:： low temperature continuous has high heat transfer efficiency, shorter time for heating the material, etc main features.
- Supply Ability
- 15 Set/Sets per Quarter 15 sets waste water falling film evaporator per quarter
waste water treatment falling film industrial evaporator price
Product Description
Application:
Suitable for evaporation concentration is lower than the saturation density of salt material, and heat sensitive, viscosity, foaming, concentration is low, liquidity good sauce class material. Especially suitable for milk, glucose, starch, xylose, pharmaceutical, chemical and biological engineering, environmental engineering, waste liquid recycling etc for evaporation and concentration, low temperature continuous has high heat transfer efficiency, shorter time for heating the material, etc main features.
Evaporation capacity: 1000-60000kg/h(Series)
In consideration of each factories all kinds of solutions with different characteristics and complexity, our company will provide specific technical scheme according to client’s requirements, reference for users to choose!
Features:
1.Because of the whole equipment uniform heating steam heating system, material liquid to liquid film flow evaporation, so it has high heat transfer efficiency, short heating time ,etc major features. If relocation thermal compression pump, more energy saving, low steam consumption and low cooling water circulation.
2.The material flow accelerated down the tube wall pressure evaporation, adapt to the larger material liquid viscosity evaporation concentration.
3.Because the material in each tube formed into membrane evaporation and material liquid heating time is very short, so evaporation and concentration is very good, especially for food larger preserve the nutrition of the food.
4.Under vacuum evaporation process, not only ensure the material requirement, also ensure the requirements of environmental protection, at the same time, greatly reduces the evaporation temperature, plus configuration thermal compression pump, part of the secondary steam by thermal compression pump suction again and raw mix, saves the steam, at the same time by thermal compression pump heating steam spray fog shaped into the shell, steam quickly spread, material liquid heating slowly, so the suitable concentration of thermal sensitive material.
5.Equipment is suitable for evaporation and concentration of foam materials , due to the material liquid into membrane evaporation in the heating tube, which form the gas-liquid separation,at the same time, most of the material liquid at the bottom of the body is siphoned off, only a small part of the material liquid into separator separation, the whole process of material liquid forming no too big impact, greatly reduce the formation of bubbles.
6.For food, evaporating equipment can have sterilization function at the same time, the material after preheating first, and then into the sterilizer, reach more than 94 degrees, hold on 24 seconds, which entered 1st -effect , rapid flash of material, temperature in an instant.
7.Equipment equip with CIP clean system, realize the in-place cleaning, the whole set of equipment is easy to operate, no dead Angle.
8.Design continuous feeding and discharging.
9.Equipment can equip with automation system, can be configured to realize automatic feed rate control, the heating temperature automatic control, automatic discharging concentration control, automatic cleaning control, can also be equipped with a sudden power failure, failure protection for sensitive material. Other safety, alarm and other automation control.
Industrial Waste Water Evaporation Multiple Effect Forced Circulation Evaporator
It is suitable forevaporation and crystallization of high-concentration, high-viscosity material and other materials containing insoluble solids.
Features
● Large concentration ratio, forced circulation type, make the viscous liquid easily flow and evaporate.
● Evaporator is forcedly circulated to heat evenly in the tube to prevent "dry wall" phenomenon.
● The main disadvantage is that the pump has a large flow and relatively high power consumption.
Working Principle
The circulation of the solution in the equipment mainly depends on the forced flow generated by the applied power. The cycle speed is generally up to 1.5-3.5 m/s. Heat transfer efficiency and production capacity are large. The raw material liquid is driven from the bottom up by the circulation pump and flows upward in the tube of the heating chamber. After the steam and liquid mixture enters the evaporation chamber, the vapor is separated from the upper part, the fluid is blocked, and is sucked by the circulating pump through the conical bottom, and then enters the heating tube to continue the circulation.
Product Show
复制产品链接
长按图片保存/分享
询盘
咨询表单：
咨询内容：
你还没有添加任何产品
