Multi-Effect Falling Film Vacuum Evaporator for Sugar Products

Sugar Products

Product Detail

Product introduction

Mechanical vaporization re-compression system, which is called MVR which principle is to compress the second steam generated by evaporator by high efficiency steam compressor; this process transfers electric energy to heating energy and higher the pressure and temperature of second steam. The second steam with higher temperature will be sent to evaporation room to heat the product for evaporation. So the latent heat of vaporization of the second steam can be circularly used. Making use of less energy which is the mechanical energy of compressor blade wheel as the compression heat pump, energy is added into the heating medium and is circularly used in heating process. Under this circumstance, no need to add first steam as heating medium.

Characteristic of system
1.Lowest energy consumption and operation cost,electricity consumption of one ton water's evaporation is 2.2ks/C
2.Temperature difference is small ,heating is gentle ,the loss of product is less
3.Compact structure and lower building cost,plant area is 50% less than that of traditional evaporator
4.Surrounding is friendly,no gas and no steam
5.Good adaptability in low loading condition,flexibility of operation is good and has a longer service life
6.Consumptio of circular water is low and energy saving is obvious
7.No fresh steam is needed
8.Evaporation can be carried out under 40degree and equipment need not to be frozen,specially suitable for thermal activity products